FarmTRX Moisture Sensor
We are pleased to announce that the FarmTRX Moisture Sensor has entered production. To thank you for your patience, existing customers will have the first opportunity to pre-order ahead of the general release. We will be producing a limited number of moisture sensors this season so we wanted to make sure our current customers have access first. The pre-order will run until July 5th. General availability pre-orders will commence on July 6th. We expect to begin shipping the Moisture Sensor in mid-July
- View instant & average moisture values while harvesting from the FarmTRX Mobile App
- View average moisture values and wet & dry yield totals
- Determine weight and volume lost to moisture
- View & export moisture maps from the FarmTRX Web App
How it works: The FarmTRX Moisture Sensor measures the dielectric properties of grain flowing over it, which is directly related to the grain’s moisture content.
- Moisture Sensor
- Plug-and-Play Wiring Harness
- Plasma Cutting Template
- Mounting Hardware
Installation Option 1: Plasma Cutter - Time: 30 Minutes:
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Clamp plasma cutter guide to door and cut hole for sensor face & mounting bolts. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.
Installation Option 2: Hole Saw & Grinder - Time 1 hr +
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Tape drilling template to door, mark centre points for hole-saw & mounting bolt locations. Using 1 ¾” hole saw, drill two holes at marked positions from template. Cut the remaining triangular sections using the template and a zipblade on a grinder. Drill mounting bolt locations. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.