Yield Monitor & Moisture Sensor Bundle
$2,744.00 $2,654.50
Buy together & save 10% off the price of the moisture sensor. Included in this package is the FarmTRX Yield Monitor & FarmTRX Moisture Sensor.
- FarmTRX Yield Monitor, including:
- Plug-and-Play Wiring Harness, Plasma Cutting Template, Mounting Hardware
- FarmTRX Moisture Sensor, including:
- Plug-and-Play Wiring Harness, Plasma Cutting Template, Mounting Hardware
- View instant & average moisture values while harvesting from the FarmTRX Mobile App
- View average moisture values and wet & dry yield totals
- Determine weight and volume lost to moisture
- View & export moisture maps from the FarmTRX Web App
- Works by measuring the dielectric properties of grain flowing over it, which is directly related to the grain’s moisture content.
All FarmTRX hardware is backed by a 2 year warranty.
Yield Monitor: The FarmTRX Yield Monitor can be user-installed using common tools in under 4 hours, with many installs happening under 2 hours.
Required tools are: pop riveter, cordless drill, angle drill, 5/32″ bit, 3/4″ step drill bit, center punch, and tape measure
View the installation video here: FarmTRX Yield Monitor Installation Video
Moisture Sensor: The FarmTRX Moisture Sensor can be user-installed using common tools in 30 min to 1 hr +, depending on available tools.
Installation Option 1: Plasma Cutter – Time: 30 Minutes:
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Clamp plasma cutter guide to door and cut hole for sensor face & mounting bolts. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.
Installation Option 2: Hole Saw & Grinder – Time 1 hr +
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Tape drilling template to door, mark centre points for hole-saw & mounting bolt locations. Using 1 ¾” hole saw, drill two holes at marked positions from template. Cut the remaining triangular sections using the template and a zipblade on a grinder. Drill mounting bolt locations. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.
The FarmTRX Yield Monitor & Moisture Sensor is compatible with any combine with a clean grain elevator. Your combine does not need to have a GPS antenna or sensors already installed.